Wing Gundam

Description

The model has been modified with more accurate colors, more details, and all parts have independent support settings for the most perfect printing method.

The downloaded file is 0.2 layer height, if you want to achieve the effect in the picture, you can directly set the layer height to 0.08.

You will need:

1, 502 glue

2, white glue

3, single-sided masking tape

Assembly Notes:

1, The parts are relatively loose, so you need to wrap the neck with masking tape several times at the neck, then insert it into the slot, and the base part is the same.

2, After assembly, it is relatively loose, you can fix it with 502, and then strengthen it by dripping in white glue.

3, After wrapping the neck with masking tape, drop in white glue, leave it for a while, and then directly bend the head, you can make the white glue fall off, but still retain a certain damping feel.

4, The two ears and the upper armor on the chest, I did not set up structural connections, use 502 to stick.

If you have time, it is recommended to print at 0.08.