$60.00
This is a 25 shell 12 Gauge 2-3/4 ammo box. It has a locking sliding cover.
This is a 25 shell 12 Gauge 2-3/4 ammo box. It has a locking sliding cover. I like to slide the cover back to reveal 5 rounds and dump them out in 5 round increments or pull out one by one as needed. It was designed to have the shells facing down. It is an easy print and requires no support. You can adjust the colors easily in the Bambu slicer. The text is user editable, so you can customize it. These do fit in a .50Cal can.
If you have any comments or suggestions please share. I am not a shotgun person and this is my first case for these. I designed it to the max SAAMI dimensions.
Assembly – Place the mid round holder into the main housing. There is a locking tab on each side and to install you have to slightly spread the main housing to allow the mid round holder to drop in. These tabs will help it from falling out when in use. The cover then slides on.
Printing – This fits on 1 tray, but it is very tight. I suggest using adhesive if you encounter issues with it raising on the edges. If you move them around on the tray they might overlap with the purge line at the front of the tray.
| Color | Blue, Green, Indigo, Orange, Red, Violet, Yellow |
|---|---|
| Size | 2mm, 4mm, 6mm |
This is a 25 shell 12 Gauge 2-3/4 ammo box. It has a locking sliding cover. I like to slide the cover back to reveal 5 rounds and dump them out in 5 round increments or pull out one by one as needed. It was designed to have the shells facing down. It is an easy print and requires no support. You can adjust the colors easily in the Bambu slicer. The text is user editable, so you can customize it. These do fit in a .50Cal can.
If you have any comments or suggestions please share. I am not a shotgun person and this is my first case for these. I designed it to the max SAAMI dimensions.
Assembly – Place the mid round holder into the main housing. There is a locking tab on each side and to install you have to slightly spread the main housing to allow the mid round holder to drop in. These tabs will help it from falling out when in use. The cover then slides on.
Printing – This fits on 1 tray, but it is very tight. I suggest using adhesive if you encounter issues with it raising on the edges. If you move them around on the tray they might overlap with the purge line at the front of the tray.
| Color | Blue, Green, Indigo, Orange, Red, Violet, Yellow |
|---|---|
| Size | 2mm, 4mm, 6mm |
There are no reviews yet.
Reviews
There are no reviews yet.