Services
3D Printing services
Design & Reverse Engineering
Additional Manufacturing
Industries
Industries we serve
Technologies
Production-grade nylon from HP Multi Jet Fusion — dense, tough and consistent at volume.
HP Nylon PA12 3D printing at KAD3D — Production-grade nylon from HP Multi Jet Fusion — dense, tough and consistent at volume.
HP's Multi Jet Fusion PA12 is a workhorse production nylon: no support structures, near-isotropic mechanicals and an excellent cost-per-part at batch volume. Parts come out grey and are typically dyed black. It is tough, chemically resistant and dimensionally consistent across a full build.
MJF nylon PA12 is a true end-use production material. It is used for clips, ducting, housings, complex assemblies and enclosures — the sort of durable black plastic parts found inside consumer and industrial products.
Typical applications include Bridge production, connectors, housings, ducting and brackets, from one to thousands of parts.
Produced with MJF, HP Nylon PA12 3D printing typically offers a tensile strength around 48 MPa, elongation at break near 20%, heat deflection about 175 °C, a density of 1.01 g/cm³, a hardness of ~78 Shore D and water absorption around 0.4%. Full technical data is listed in the table below.
For dimensional work, HP Nylon PA12 supports a typical layer height or tolerance of ±0.20 mm or ±0.2%.
This makes HP Nylon PA12 a strong choice for parts that need end-use production, impact-tough, chemical / moisture exposure, heat over 100 °c and fatigue-resistant.
Finishing options for HP Nylon PA12 include Dyeing, Bead Blast, Chemical Smoothing and Sealing.
Standard turnaround for HP Nylon PA12 is 10 business days, with an express option in 3–5 business days, from order confirmation and delivered Australia-wide.
Well suited to mining-duty and automotive components for operations across Western Australia and Queensland, where its toughness, chemical resistance and low cost-per-part at volume make short production runs viable without tooling.
Behaves close to injection-moulded nylon without the tooling.
Clean, consistent matte grey off the machine; dyes black evenly and can be chemically smoothed. The most popular finish is Bead-blast and dye black for the standard production finish. Available grey as-printed or dyed black, per process. Maximum build size is up to 380 × 380 × 280 mm.
HP Multi Jet Fusion fuses nylon powder with a fine detailing agent, delivering consistent, production-grade parts with crisp feature resolution. You can read more about the MJF process on Wikipedia.
Not sure HP Nylon PA12 is the right pick? Include a line about your part's job when you upload your STL, STEP or 3MF file, and our team will sanity-check the choice against the alternatives on cost, lead time and performance — then prepare wall thickness, infill and orientation to suit.
From a single prototype to a repeatable low-volume run, KAD3D handles HP Nylon PA12 3D printing end to end in Melbourne — free instant quotes online, honest advice on material and finish, a check on every part before it ships, and delivery anywhere in Australia. 3–5 business days express is available on this material.
Indicative pricing for HP Nylon PA12 starts around $24.07 AUD for small parts. Every job is quoted exactly on geometry and quantity — instant online quotes are free.
Standard turnaround for HP Nylon PA12 is 10 business days from order confirmation, with a 3–5 business days express option, delivered Australia-wide.
Printed HP Nylon PA12 offers a tensile strength around 48 MPa. The full technical profile, including the figures that matter for your part, is in the table on this page.
The maximum build size for HP Nylon PA12 is 380 × 380 × 280 mm. Larger parts can often be printed in sections and joined — ask when you quote.
Yes — HP Nylon PA12 takes primer and paint well. The most common finishing routes for this material are listed above, and our team can recommend the right one for your part.
Typical layer height or tolerance for HP Nylon PA12 is ±0.20 mm or ±0.2%. If a feature needs to be tighter, flag it when you quote and we will confirm what is achievable.
Compare HP Nylon PA12 with HP Nylon PA12 GB, or browse the full materials hub.
Ready to start? Upload your file for a free instant quote on HP Nylon PA12 3D printing at KAD3D.
Clean, consistent matte grey off the machine; dyes black evenly and can be chemically smoothed.
Available grey as-printed or dyed black, per process.
Lead times are indicative and start from order confirmation. Actual turnaround varies model by model, depending on part geometry, print time, quantity and shipping location. Express service incurs an additional charge. Express availability is subject to current machine capacity — please confirm when ordering.
Contact us| Price | $24.07 |
| Tensile strength | 48 MPa |
| Elongation at break | 20 % |
| Heat deflection (0.45 MPa) | 175 °C |
| Heat deflection (1.80 MPa) | 95 °C |
| Hardness | ~78 Shore D |
| Density | 1.01 g/cm³ |
| Water absorption (24 h) | 0.4 % |
| Layer / tolerance | ±0.20 mm or ±0.2% |
Parts printed in HP Nylon PA12 in MJF can be finished a number of ways at KAD3D, from a clean functional surface to a fully painted, display-ready result. The treatments below are the ones we most often apply to this material.
Most popular finish: Bead-blast and dye black for the standard production finish.
To make material costs easy to compare, KAD3D prints the same standard model — the #3DBenchy — in every material. The price shown is what that identical benchmark part costs in HP Nylon PA12, so you can weigh materials against each other on a genuine like-for-like basis before uploading your own file.
Benchmark price is a guide for comparison only; your part is quoted on its own size, geometry and finishing. Upload your model for an exact price.
These prices were taken on 1 July 2026 and are still in place.
Printed in-house by KAD3D. Upload your part for an instant quote.
Get instant quote Made in Melbourne · delivered Australia-wide.Material data on these pages was compiled with the assistance of online research tools, in good faith, and may contain inaccuracies. Values are indicative only and intended to give a closer idea of each material's behaviour. For accurate, batch-specific TDS or SDS documentation, please contact KAD3D directly. KAD3D accepts no liability for any reliance on this information.