Services
3D Printing services
Design & Reverse Engineering
Additional Manufacturing
Industries
Industries we serve
Technologies
The 135 °C resin — SLA detail for parts that meet real heat.
KS1208H is Kings' high-temperature SLA resin, rated to around 135 °C, in a semi-transparent yellow. It holds SLA detail through thermal cycling for short-run heat-exposed tooling and fixtures. Like other high-temp resins it is stiff and brittle, so it suits thermal duty rather than impact.
The high-temperature resin is used for heat-facing parts: hot-air and mould tooling, fixtures near heat sources, and prototypes that must hold their shape at elevated temperatures.
Very smooth, semi-transparent yellow off the printer; holds fine detail through thermal cycling.
Available semi-transparent yellow, per manufacturer.
Lead times are indicative and start from order confirmation. Actual turnaround varies model by model, depending on part geometry, print time, quantity and shipping location. Express service incurs an additional charge. Express availability is subject to current machine capacity — please confirm when ordering.
Contact us| Price | $67.83 |
| Tensile strength | 65 MPa |
| Elongation at break | 3 % |
| Heat deflection (0.45 MPa) | 135 °C |
| Hardness | ~85 Shore D |
| Density | 1.16 g/cm³ |
| Water absorption (24 h) | 0.3 % |
| Layer / tolerance | ±0.10–0.20 mm or ±0.2% |
Parts printed in KS1208H High-Temperature Resin in SLA can be finished a number of ways at KAD3D, from a clean functional surface to a fully painted, display-ready result. The treatments below are the ones we most often apply to this material.
Most popular finish: Thermal post-cure for full heat resistance; machine critical faces.
To make material costs easy to compare, KAD3D prints the same standard model — the #3DBenchy — in every material. The price shown is what that identical benchmark part costs in KS1208H High-Temperature Resin, so you can weigh materials against each other on a genuine like-for-like basis before uploading your own file.
Benchmark price is a guide for comparison only; your part is quoted on its own size, geometry and finishing. Upload your model for an exact price.
These prices were taken on 1 July 2026 and are still in place.
Injection-mould inserts, hot-air ducting fixtures, and thermal test fixtures.
Commonly chosen by Melbourne and Geelong tooling teams for short-run heat-exposed fixtures and mould inserts where SLA detail must survive thermal cycling.
Printed in-house by KAD3D. Upload your part for an instant quote.
Get instant quote Made in Melbourne · delivered Australia-wide.Material data on these pages was compiled with the assistance of online research tools, in good faith, and may contain inaccuracies. Values are indicative only and intended to give a closer idea of each material's behaviour. For accurate, batch-specific TDS or SDS documentation, please contact KAD3D directly. KAD3D accepts no liability for any reliance on this information.