Services
3D Printing services
Design & Reverse Engineering
Additional Manufacturing
Industries
Industries we serve
Technologies
Soft-touch precision — flexible SLA parts with a smooth surface.
KS198S is Kings' flexible SLA resin at around Shore 82A: it prints smooth, detailed rubber-like parts that SLA's surface quality makes cleaner than filament TPU, suited to seals, grips and ergonomic form studies. It tears under aggressive elongation and drifts under prolonged UV.
This flexible resin is used for soft-touch and ergonomic parts — grips, seals, gaskets and wearable shapes — where a rubber-like feel is needed with fine SLA detail.
Smooth, soft-touch surface off the printer; cleaner detail than filament TPU but difficult to sand.
Available translucent, per manufacturer.
Lead times are indicative and start from order confirmation. Actual turnaround varies model by model, depending on part geometry, print time, quantity and shipping location. Express service incurs an additional charge. Express availability is subject to current machine capacity — please confirm when ordering.
Contact us| Price | $70.59 |
| Tensile strength | 6 MPa |
| Elongation at break | 120 % |
| Hardness | 82A Shore |
| Density | 1.12 g/cm³ |
| Water absorption (24 h) | 1.0 % |
| Layer / tolerance | ±0.10–0.20 mm or ±0.2% |
Parts printed in KS198S Flexible Resin in SLA can be finished a number of ways at KAD3D, from a clean functional surface to a fully painted, display-ready result. The treatments below are the ones we most often apply to this material.
Most popular finish: Print in the final form; flexible resins are difficult to sand.
To make material costs easy to compare, KAD3D prints the same standard model — the #3DBenchy — in every material. The price shown is what that identical benchmark part costs in KS198S Flexible Resin, so you can weigh materials against each other on a genuine like-for-like basis before uploading your own file.
Benchmark price is a guide for comparison only; your part is quoted on its own size, geometry and finishing. Upload your model for an exact price.
These prices were taken on 1 July 2026 and are still in place.
Seals, ergonomic grips, wearable form studies, and cushioning.
Often chosen by Melbourne and Adelaide product teams for seals, grips and wearable form studies where a smooth, detailed soft-touch part is needed.
Stands in for moulded soft rubber for prototyping.
Printed in-house by KAD3D. Upload your part for an instant quote.
Get instant quote Made in Melbourne · delivered Australia-wide.Material data on these pages was compiled with the assistance of online research tools, in good faith, and may contain inaccuracies. Values are indicative only and intended to give a closer idea of each material's behaviour. For accurate, batch-specific TDS or SDS documentation, please contact KAD3D directly. KAD3D accepts no liability for any reliance on this information.