Services
3D Printing services
Design & Reverse Engineering
Additional Manufacturing
Industries
Industries we serve
Technologies
Rubber you can print — grippy, bouncy and near-indestructible.
TPU 95A is a printable rubber: it stretches enormously and springs back, absorbs impact and abrasion, and grips like rubber. It prints slowly and to looser tolerances than rigid plastics, and fine unsupported detail is difficult.
TPU is the flexible, rubber-like material behind phone cases, gaskets, seals, protective bumpers, wearable straps and shoe soles. It is printed for grips, flexible mounts and any part that needs to bend and spring back.
Slightly rubbery matte surface with visible layer lines; not easily sanded, so print in the final colour.
Range of colours and hardnesses (85A–98A) available — reach out to check a specific option.
Lead times are indicative and start from order confirmation. Actual turnaround varies model by model, depending on part geometry, print time, quantity and shipping location. Express service incurs an additional charge. Express availability is subject to current machine capacity — please confirm when ordering.
Contact us| Price | $13.87 |
| Tensile strength | 27 MPa |
| Elongation at break | 650 % |
| Hardness | 95A Shore |
| Density | 1.22 g/cm³ |
| Water absorption (24 h) | 1.2 % |
| Layer / tolerance | ±0.25–0.30 mm or ±0.5% |
Parts printed in TPU 95A in FDM can be finished a number of ways at KAD3D, from a clean functional surface to a fully painted, display-ready result. The treatments below are the ones we most often apply to this material.
Most popular finish: Print in the final colour — TPU is difficult to finish; design the surface into the part.
To make material costs easy to compare, KAD3D prints the same standard model — the #3DBenchy — in every material. The price shown is what that identical benchmark part costs in TPU 95A, so you can weigh materials against each other on a genuine like-for-like basis before uploading your own file.
Benchmark price is a guide for comparison only; your part is quoted on its own size, geometry and finishing. Upload your model for an exact price.
These prices were taken on 1 July 2026 and are still in place.
Gaskets, grips, casters, protective bumpers, and wearable prototypes.
Often chosen by Sydney and Melbourne product teams for grips, seals and protective bumpers where a genuinely rubber-like, hard-wearing part is needed without soft tooling.
Stands in for moulded rubber and cast polyurethane parts.
Printed in-house by KAD3D. Upload your part for an instant quote.
Get instant quote Made in Melbourne · delivered Australia-wide.Material data on these pages was compiled with the assistance of online research tools, in good faith, and may contain inaccuracies. Values are indicative only and intended to give a closer idea of each material's behaviour. For accurate, batch-specific TDS or SDS documentation, please contact KAD3D directly. KAD3D accepts no liability for any reliance on this information.