Services
3D Printing services
Design & Reverse Engineering
Additional Manufacturing
Industries
Industries we serve
Technologies
Rubber you can print — grippy, bouncy and near-indestructible.
TPU 95A 3D printing at KAD3D — Rubber you can print — grippy, bouncy and near-indestructible.
TPU 95A is a printable rubber: it stretches enormously and springs back, absorbs impact and abrasion, and grips like rubber. It prints slowly and to looser tolerances than rigid plastics, and fine unsupported detail is difficult.
TPU is the flexible, rubber-like material behind phone cases, gaskets, seals, protective bumpers, wearable straps and shoe soles. It is printed for grips, flexible mounts and any part that needs to bend and spring back.
Typical applications include Gaskets, grips, casters, protective bumpers, and wearable prototypes.
Produced with FDM, TPU 95A 3D printing typically offers a tensile strength around 27 MPa, elongation at break near 650%, a density of 1.22 g/cm³, a hardness of 95A Shore and water absorption around 1.2%. Full technical data is listed in the table below.
For dimensional work, TPU 95A supports a typical layer height or tolerance of ±0.25–0.30 mm or ±0.5%.
This makes TPU 95A a strong choice for parts that need flexible / rubber-like, impact-tough, end-use production, water-resistant and fatigue-resistant.
Finishing options for TPU 95A include Painting / Priming.
Standard turnaround for TPU 95A is 3 business days, with an express option in 24 hours, from order confirmation and delivered Australia-wide.
Often chosen by Sydney and Melbourne product teams for grips, seals and protective bumpers where a genuinely rubber-like, hard-wearing part is needed without soft tooling.
Stands in for moulded rubber and cast polyurethane parts.
Slightly rubbery matte surface with visible layer lines; not easily sanded, so print in the final colour. The most popular finish is Print in the final colour — TPU is difficult to finish; design the surface into the part. Range of colours and hardnesses (85A–98A) available — reach out to check a specific option. Maximum build size is up to 1000 × 1000 × 1000 mm (larger on request).
FDM (fused deposition modelling) builds each part layer by layer from a molten thermoplastic filament — a fast, cost-effective process ideal for prototypes and functional parts. You can read more about the FDM process on Wikipedia.
To get the best results with TPU 95A, send your part as an STL, STEP or 3MF file and tell us the intended use, the tolerances that matter and any cosmetic finish you need. Our team confirms the ideal build orientation, wall thickness and infill, and flags anything that could affect strength, accuracy or surface quality before printing begins.
From a single prototype to a repeatable low-volume run, KAD3D handles TPU 95A 3D printing end to end in Melbourne — free instant quotes online, honest advice on material and finish, a check on every part before it ships, and delivery anywhere in Australia. 24 hours express is available on this material.
Indicative pricing for TPU 95A starts around $13.87 AUD for small parts. Every job is quoted exactly on geometry and quantity — instant online quotes are free.
Standard turnaround for TPU 95A is 3 business days from order confirmation, with a 24 hours express option, delivered Australia-wide.
Printed TPU 95A offers a tensile strength around 27 MPa. The full technical profile, including the figures that matter for your part, is in the table on this page.
The maximum build size for TPU 95A is 1000 × 1000 × 1000 mm (larger on request). Larger parts can often be printed in sections and joined — ask when you quote.
Typical layer height or tolerance for TPU 95A is ±0.25–0.30 mm or ±0.5%. If a feature needs to be tighter, flag it when you quote and we will confirm what is achievable.
Range of colours and hardnesses (85A–98A) available — reach out to check a specific option.
Compare TPU 95A with ABS, ASA, ASA-CF, PETG, PLA, or browse the full materials hub.
Ready to start? Upload your file for a free instant quote on TPU 95A 3D printing at KAD3D.
Slightly rubbery matte surface with visible layer lines; not easily sanded, so print in the final colour.
Range of colours and hardnesses (85A–98A) available — reach out to check a specific option.
Lead times are indicative and start from order confirmation. Actual turnaround varies model by model, depending on part geometry, print time, quantity and shipping location. Express service incurs an additional charge. Express availability is subject to current machine capacity — please confirm when ordering.
Contact us| Price | $13.87 |
| Tensile strength | 27 MPa |
| Elongation at break | 650 % |
| Hardness | 95A Shore |
| Density | 1.22 g/cm³ |
| Water absorption (24 h) | 1.2 % |
| Layer / tolerance | ±0.25–0.30 mm or ±0.5% |
Parts printed in TPU 95A in FDM can be finished a number of ways at KAD3D, from a clean functional surface to a fully painted, display-ready result. The treatments below are the ones we most often apply to this material.
Most popular finish: Print in the final colour — TPU is difficult to finish; design the surface into the part.
To make material costs easy to compare, KAD3D prints the same standard model — the #3DBenchy — in every material. The price shown is what that identical benchmark part costs in TPU 95A, so you can weigh materials against each other on a genuine like-for-like basis before uploading your own file.
Benchmark price is a guide for comparison only; your part is quoted on its own size, geometry and finishing. Upload your model for an exact price.
These prices were taken on 1 July 2026 and are still in place.
Printed in-house by KAD3D. Upload your part for an instant quote.
Get instant quote Made in Melbourne · delivered Australia-wide.Material data on these pages was compiled with the assistance of online research tools, in good faith, and may contain inaccuracies. Values are indicative only and intended to give a closer idea of each material's behaviour. For accurate, batch-specific TDS or SDS documentation, please contact KAD3D directly. KAD3D accepts no liability for any reliance on this information.